Liquid receiver with suction accumulator and heat exchanger made in 2 pieces up to max. 45 bar
Both the external receiver and the internal suction accumulator are built with two deep-drawn caps.
Volumes of liquid receiver from 1.75 L. up to 18.5 L.
Volumes of suction accumulator from 1.6 L. up to 16 L.
|CONNECTION TYPE AND SIZE:||
Connection on liquid receiver: ODS from Ø10 up to Ø18, in combination with Rotalock connections 1", 1"-1/4, 1"-3/4
Connection on suction accumulator: ODS from Ø12 up to Ø54
Upon request, it is possible to manufacture special models
|PED RISK CATEGORY:||ART.3.3-I-II|
|MAXIMUM ALLOWABLE PRESSURE:||
Two series are available:
Liquid receiver at 28 bar and suction accumulator at 20 bar
Liquid receiver at 33 bar and suction accumulator at 25 bar
Upon request, working pressures up to max. 45 are available
Request of a 3D solid model
Provisions for sending 3D (STEP) drawings
- IN CASE YOU ALREADY ARE A FRIGOMEC'S CUSTOMER:
Dear Customer, we kindly ask you to fill our module in with the drawing code or the serial number of the vessel and the manufacturing year indicated on the label/nameplate placed on all our products. You will receive the 3D drawing (STEP) on the same e-mail address as soon as possible.
- IN CASE YOU ARE NOT A FRIGOMEC'S CUSTOMER:
We can send the 3D drawing (STEP) only for standard products (VALVES or MUFFLERS). Our products are mainly "custom" and therefore our customers have a design right on them.
In order to obtain the 3D drawing of a product mounted on a refrigerating machine you should ask it directly to the manufacturer of the machine.
If you are not a Frigomec's customer and you need a quotation and the relative 3D model, you should ask them to the sales department at the e-mail address email@example.com or send the enquiry using the dedicated enquiry form on our website.